fbpx

How to check accuracy of Echosounder

To check the accuracy of an echosounder, several steps can be taken:

  1. Conduct a calibration check: The first step in checking the accuracy of an echosounder is to perform a calibration check. This involves checking the timing of the transmission and reception of the sound waves and verifying that they are accurate.

  2. Check the settings: The settings of the echosounder should be checked to ensure that they are set correctly. This includes the frequency of the sound waves, the pulse length, and the power output. These settings can affect the accuracy of the echosounder.

  3. Compare to known depths: The depth readings obtained from the echosounder should be compared to known depths in the area. This can be done by referencing nautical charts, depth markers, or previous surveys of the area. Any discrepancies between the known depths and the echosounder readings should be noted and investigated.

  4. Conduct multiple surveys: Multiple surveys of the same area can be conducted to verify the accuracy of the echosounder. If the readings are consistent across multiple surveys, this indicates that the echosounder is accurate.

  5. Check for errors: Any errors in the echosounder readings should be noted and investigated. Errors can be caused by a variety of factors, such as temperature, salinity, or air bubbles in the water. Corrections can be made to account for these factors.

  6. Verify with other instruments: The accuracy of the echosounder can be verified by comparing the readings to those obtained from other instruments, such as a chart/ ECDIS Depths.

Overall, it is important to regularly check the accuracy of an echosounder to ensure that the data obtained is reliable and can be used for navigation or scientific research.

For Advanced Read, check out:

Bridge Equipment

Log in

Log in with Google

Log in with LinkedIn

Or

Don’t have an account? Register Now