Hydraulic Start & Stop

Hydraulic Start & Stop

  1. Out the switch in manual mode as stated above and check the pressure gauge for sufficient oil pressure.
  2. Open the valve from the accumulator to the generator.
  3. Push the spring-loaded valve and the generator should start.
  4. Check voltage and frequency.
  5. Keep the generator running for 10-15 min and check the exhaust temp and other parameters.
  6. Check the sump level
  7. For stopping, use the manual stop button from the panel.
  8. After stopping the generator, pressurize the hydraulic accumulator to the desired pressure.
  9. Close the valve from the accumulator to the generator.

Hydraulic starting

 

How Can We Help You?

Log in

Log in with Google

Log in with LinkedIn

Or

Don’t have an account? Register Now